Skip to main content

Deploy to MAAS

This guide provides you with the steps to deploy a PCG cluster to a MAAS environment. Before you begin the installation, carefully review the Prerequisites section.

Prerequisites

  • Palette version 4.0.X or greater.

  • A Palette API key. Refer to the Create API Key page for guidance.

    warning

    The installation does not work with Single Sign-On (SSO) credentials. You must use an API key from a local tenant admin account in Palette to deploy the PCG. After the PCG is configured and functioning, this local account is no longer used to keep the PCG connected to Palette, so you can deactivate the account if desired.

  • Download and install the Palette CLI from the Downloads page. Refer to the Palette CLI Install guide to learn more.

The following system requirements must be met to install a PCG in MAAS:

  • PCG IP address requirements:

    • One IP address for a single-node PCG or three IP addresses for a three-node PCG. Refer to the PCG Sizing section for more information on sizing.
    • One IP address for the Kubernetes control-plane.
    • DNS can resolve the domain api.spectrocloud.com.
  • An x86 Linux environment with a Docker daemon installed and a connection to Palette and the MAAS endpoint. The Palette CLI installation must be invoked on an up-to-date Linux system with the x86-64 architecture.

  • PCG IP address requirements:

    • For a single-node gateway, one IP address must be available in the MAAS subnet for the PCG, or three available IP addresses for a three-node gateway.
    • One IP address must be available in the MAAS subnet for the Kubernetes API-server endpoint when deploying a three-node gateway.
    • One IP address reserved for cluster repave operations.
    • One IP address for the Virtual IP (VIP).
  • Sufficient IP range available within the configured MAAS subnets.

    warning

    By default, the MAAS Kubernetes pack uses a pod Classless Inter-Domain Routing (CIDR) range of 192.168.0.0/16. Ensure that the pod CIDR range for any clusters you deploy after setting up the PCG does not overlap with the network used by the bare metal machines that MAAS manages.

  • Each node in the PCG cluster requires a machine from MAAS in a ready state with the following resources:

    • CPU: 4
    • Memory: 8192 MiB
    • Storage: 60 GiB

    For production environments, we recommend using three nodes, each with 100 GiB of storage, as nodes can exhaust the 60 GiB storage with prolonged use. If you initially set up the gateway with one node, you can resize it later.

  • An active MAAS API key. Refer to the Authenticating to the MAAS API guide to learn more about how to create an API key.

  • The DNS server that the PCG installer will use must be able to resolve the DNS names of machines that MAAS deploys so it can connect to them. The default setup is to use the MAAS server as the DNS server for any bare metal servers that it deploys. The default MAAS DNS zone is .maas. You can use .maas or the MAAS web console to create a new DNS zone. When you deploy the PCG and clusters, you can select the desired DNS zone in which DNS name records should be created.

    In the MAAS subnet configuration, you can specify which DNS servers those servers in the MAAS subnet should use.

    warning

    If you configure a DNS server other than the MAAS DNS server, you must create a DNS delegation so that it can forward DNS requests for zones that are hosted by MAAS to the MAAS DNS server.

The installation process first requests machines from MAAS and then must connect to them. To connect, the installation process attempts to use the Fully Qualified Domain Name (FQDN) of the server. If you used .maas as the default DNS zone, the FQDN would be machine-hostname.maas.

The diagram below shows an example of using an external DNS server for servers that MAAS deploys in addition to a DNS delegation. This ensures all servers in the network can resolve the DNS names of servers deployed by MAAS. Note that it is not required for the DNS records to be accessible from the internet.

Image showing external DNS server machines that MAAS deploys in addition to a DNS delegation

Deploy PCG

  1. In an x86 Linux host with the Palette CLI installed, open up a terminal session.

  2. Issue the following command to authenticate with Palette. When prompted, enter the required information. Refer to the table below for information about each parameter.

    palette login
    ParameterDescription
    Spectro Cloud ConsoleEnter the Palette endpoint URL. When using the Palette SaaS service, enter https://console.spectrocloud.com. When using a self-hosted instance of Palette, enter the URL for that instance.
    Allow Insecure ConnectionEnabling this option bypasses x509 server Certificate Authority (CA) verification. Enter y if you are using a self-hosted Palette or VerteX instance with self-signed TLS certificates and need to provide a file path to the instance CA. Otherwise, enter n.
    Spectro Cloud API KeyEnter your Palette API Key. Refer to the Create API Key guide to create an API key.
    Spectro Cloud OrganizationSelect your Palette Organization name.
    Spectro Cloud ProjectSelect the project name you want to register the MAAS account in.
    AcknowledgeAccept the login banner message. Login banner messages are only displayed if the tenant admin enabled a login banner.
    info

    The CloudAccount.apiKey and Mgmt.apiKey values in the pcg.yaml file are encrypted and cannot be manually updated. To change these values, use the palette pcg install --update-passwords command. Refer to the PCG command reference page for more information.

  3. Once you have authenticated successfully, start the PCG installer by issuing the following command. Refer to the table below for information about each parameter.

    palette pcg install
    ParameterDescription
    Management Plane TypeSelect Palette or VerteX.
    Enable Ubuntu Pro (required for production)Enter y if you want to use Ubuntu Pro and provide an Ubuntu Pro token. Otherwise, enter n.
    Select an image registry typeFor a non-airgap installation, choose Default to pull images from public image registries. This requires an internet connection. Select' Custom' for an airgap installation and point to your airgap support VM or a custom internal registry containing the required images.
    Cloud TypeSelect MAAS.
    Private Cloud Gateway NameEnter a custom name for the PCG. Example: maas-pcg-1.
    Share PCG Cloud Account across platform ProjectsEnter y if you want the Cloud Account associated with the PCG to be available from all projects within your organization. Enter n if you want the Cloud Account to only be available at the tenant admin scope.
  4. Next, provide environment configurations for the cluster. Refer to the following table for information about each option.

    ParameterDescription
    HTTPS ProxyLeave this blank unless you are using an HTTPS Proxy. This setting will be propagated to all PCG nodes and all of its cluster nodes. Example: https://USERNAME:PASSWORD@PROXYIP:PROXYPORT.
    HTTP ProxyLeave this blank unless you are using an HTTP Proxy. This setting will be propagated to all PCG nodes and all of its cluster nodes. Example: http://USERNAME:PASSWORD@PROXYIP:PROXYPORT.
    No ProxyProvide a list of local network CIDR addresses, hostnames, and domain names that should be excluded from being a proxy. This setting will be propagated to all the nodes to bypass the proxy server. Example for a self-hosted environment: my.company.com,10.10.0.0/16.
    Proxy CA Certificate FilepathThe default is blank. You can provide the file path of a CA certificate on the installer host. If provided, this CA certificate will be copied to each host in the PCG cluster during deployment. The provided path will be used on the PCG cluster hosts. Example: /usr/local/share/ca-certificates/ca.crt.
    Pod CIDREnter the CIDR pool that will be used to assign IP addresses to pods in the PCG cluster. The pod IP addresses should be unique and not overlap with any machine IPs in the environment.
    Service IP RangeEnter the IP address range that will be used to assign IP addresses to services in the PCG cluster. The service IP addresses should be unique and not overlap with any machine IPs in the environment.
  5. If you selected Custom for the image registry type, you will be prompted to provide the following information.

    ParameterDescription
    Registry NameAssign a name to the custom registry.
    Registry EndpointThe endpoint or IP address for the custom registry. Example: https://palette.example.com or https://10.10.1.0.
    Registry Base Content PathThe base content path for the custom registry. Example: spectro-images.
    Configure Registry MirrorYour system default text editor, such as Vi, will open up and allow you to customize the default mirror registry settings. Add any additional registry mirrors you want to add. Otherwise, press Esc and then :wq to save and exit the file.
    Allow Insecure Connection (Bypass x509 Verification)Enabling this option bypasses x509 CA verification. Enter n if using a custom registry with self-signed SSL certificates. Otherwise, enter y. If you enter y, you will receive a follow-up prompt asking you to provide the file path to the CA certificate.
    Registry CA certificate FilepathThe CA certificate for the custom registry. This is optional. Provide the file path of the CA certificate on the installer host. Example: /usr/local/share/ca-certificates/ca.crt.
    Registry UsernameThe username for the custom registry.
    PasswordThe password for the custom registry.
  6. Provide the MAAS API key and the MAAS server URL. Refer to the table below for information about each parameter.

    ParameterDescription
    MAAS API KeyEnter the MAAS API key.
    MAAS Server URLEnter the MAAS server URL. Example: http://10.1.1.1:5240/MAAS.
  7. Configure the PCG Cluster. The values provided will determine which machines should be selected in MAAS for the PCG deployment. Refer to the table below for information about each parameter.

    ParameterDescription
    DomainSelect the MAAS domain.
    Patch OS on bootThis parameter indicates whether or not to patch the OS of the PCG hosts on the first boot.
    Reboot nodes once OS patch is appliedThis parameter indicates whether or not to reboot PCG nodes after OS patches are applied.
    Availability ZoneSelect the availability zones for the PCG cluster.
    Number of NodesSelect the number of nodes for the PCG cluster. We recommend three nodes for production environments.
    Node AffinitySelect y to allow all Palette pods to be scheduled on control plane nodes.
    warning

    Ensure the MAAS server has one or more machines in the Ready state for the chosen availability zone and resource pool combination.

  8. A new PCG configuration file is generated, and its location is displayed on the console. You will receive an output similar to the following.

    ==== PCG config saved ====
    Location: :/home/demo/.palette/pcg/pcg-20230706150945/pcg.yaml

    The Palette CLI will now provision a PCG cluster in your MAAS environment. You can monitor the progress of the PCG cluster by navigating to Palette and selecting Tenant Settings from the left Main Menu. Next, click on Private Cloud Gateways from the left Tenant Settings Menu and select the PCG cluster you just deployed to access its details page. From the details page, select the Events tab to view the progress of the PCG cluster deployment.

    If you encounter issues during the installation, refer to the PCG Troubleshooting guide for debugging assistance. If you need additional help, reach out to our Customer Support team.

    warning

    You cannot modify a deployed PCG cluster. If you need to make changes to the PCG cluster, you must first delete the cluster and redeploy it. We recommend you save your PCG configuration file for future use. Use the --config-only flag to save the configuration file without deploying the PCG cluster. Refer to the Generate a Configuration File section to learn more. For additional assistance, visit our Customer Support portal.

Validate

Once installed, the PCG registers itself with Palette. To verify the PCG is registered, use the following steps.

  1. Log in to Palette as a tenant admin.

  2. Navigate to the left Main Menu and select Tenant Settings.

  3. From the Tenant Settings Menu, click on Private Cloud Gateways. Verify your PCG cluster is available from the list of PCG clusters displayed and that its Status is healthy.

  4. Navigate to the left Tenant Settings Menu and select Cloud Accounts.

  5. Verify a new MAAS cloud account is available from the list of cloud accounts displayed.

Next Steps

After you have successfully deployed the PCG into your MAAS environment, you can now deploy Kubernetes clusters in your environment through Palette. Check out the Create and Manage MAAS Clusters guide to learn how to deploy a Kubernetes cluster in MAAS that is managed by Palette.